What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 00:15

The other is “what does a “fuse” do?”
A fuse is a non-resetable over current circuit protector.
He then describes Rainy Season and Lightning.
Trump tariffs expected to dampen global economic growth, OECD says - The Washington Post
What is lightning?
In schematic diagrams this is the symbol for a fuse:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What motivated you to start reading books in English? What was the first book you read in English?
It seems Mohan does not understand the difference between a comment and an Answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The mystery rise of lung cancer in non-smokers - BBC
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Barnstars:
the problem then depends on "how fast does the fuse operate?".
Dicta numquam repudiandae corrupti labore ea facere.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One
A circuit breaker is similar, but is resettable.
When Kundalini is awakened accidentally, what can be done?
2024–10–14 [Omar Gharbi Omar Gharbi ]
At least they know the answer if they wanted it.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The bolt then partially travels down the line to your home.
What are some sunscreens for oily skin that works under foundation?
but I think this circuit , shows a few more pieces.
But… the neutral is now “floating” because of the 1 ohm resistance.
a photo is worth a thousand words.
UFC 316 results: Kayla Harrison finishes Julianna Peña, squares off with Amanda Nunes - MMA Junkie
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Edit 2024–10.
[image of Common-mode choke]
Which is better, a naked picture of some one you know or porn videos?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
UNC Falls to Oklahoma, Setting Up Winner-Take-All Finale in Regional - 247Sports
An AC voltage/ current source, and an ac inductive load.
This device then solves the entire problem.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
'The Life of Chuck' Filmmaker Mike Flanagan on Stephen King Film - IndieWire
Upvotes:
There are three different concepts here that are getting confused.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Do all Koreans look like K-pop idols?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then asserts :
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Now when you have a certain ac resistance, then a current flows in a loop.
[old diagram got deleted by accident]
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This one hit behind the barn.
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
eight
2024–10–16 [ OO OLAOYE OYEBODE ]
The third is lightning and “how it gets conducted into a home.”
It also is a device that limits the change in current flow.
First Sentence:
(Dc diagram shown, AC is similar).
These are simplified answers to the original question, and does not change anything I wrote above.
This is 'the assistant's answer'
This is where the MOV conducts again, and dissipated the energy.
One is “what exactly is in a ‘surge protector’ ? ”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
but this device (an Inductor) … impedes the rapid changes in the current.
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
What does a fuse do?
He then describes the function of a fuse.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
There are two important concepts here.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At one ohm, the resistor has a maximum of 1 watt power.
nine